DAVID HART AEROSPACE PIPES LIMITED

Business address

LONG CLOSE DOWNTON SALISBURY WILTSHIRE SP5 3HS

Commodities traded

Download trade history for DAVID HART AEROSPACE PIPES LIMITED (CSV)

Imported commodities

Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter;paints and varnishes; putty and other mastics; inks Commodity code: 32
- Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like Commodity code: 32 14
  - Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings Commodity code: 32 14 10
    - Painter's fillings Commodity code: 32 14 10 90
Plastics and plastic products Commodity code: 39
- Tubes, pipes and hoses, and fittings therefor, e.g. joints, elbows, flanges, of plastics Commodity code: 39 17
- Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls (excl. floor, wall and ceiling coverings of heading 3918) Commodity code: 39 19
  - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide Commodity code: 39 19 10
    - Plastic strips, coated with unvulcanised natural or synthetic rubber, self-adhesive, in rolls <= 20 cm wide (excl. such products of poly"vinyl chloride", polyethylenes or polypropylenes) Commodity code: 39 19 10 19
    - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber) Commodity code: 39 19 10 80
  - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918) Commodity code: 39 19 90
    - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) Commodity code: 39 19 90 80
- Plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-a Commodity code: 39 20
  - Plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonat Commodity code: 39 20 69
    - Plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918) Commodity code: 39 20 69 00
- Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive pr Commodity code: 39 21
  - Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, Commodity code: 39 21 19
    - Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30) Commodity code: 39 21 19 00
- Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. Commodity code: 39 26
  - Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s (excl. goods of 9619) Commodity code: 39 26 90
    - Perforated buckets and similar articles used to filter water at the entrance to drains, of plastics Commodity code: 39 26 90 50
    - Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. Commodity code: 39 26 90 97
Rubber and articles thereof Commodity code: 40
- Articles of vulcanised rubber (excl. hard rubber), n.e.s. Commodity code: 40 16
  - Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) Commodity code: 40 16 93
    - Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) Commodity code: 40 16 93 00
  - Articles of vulcanised rubber (excl. hard rubber), n.e.s. Commodity code: 40 16 99
    - Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber) Commodity code: 40 16 99 97
Paper and paperboard; articles of paper pulp, paper or paperboard Commodity code: 48
- Paper or paperboard labels of all kinds, whether or not printed Commodity code: 48 21
  - Paper or paperboard labels of all kinds, printed Commodity code: 48 21 10
    - Self-adhesive paper or paperboard labels of all kinds, printed Commodity code: 48 21 10 10
    - Paper or paperboard labels of all kinds, printed (excl. self-adhesive) Commodity code: 48 21 10 90
  - Paper or paperboard labels of all kinds, non-printed Commodity code: 48 21 90
    - Paper or paperboard labels of all kinds, non-printed (excl. self-adhesive) Commodity code: 48 21 90 90
Books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans Commodity code: 49
- Printed matter, incl. printed pictures and photographs, n.e.s. Commodity code: 49 11
  - Trade advertising material, commercial catalogues and the like Commodity code: 49 11 10
    - Commercial catalogues Commodity code: 49 11 10 10
Other made up textile articles; sets; worn clothing and worn textile articles; rags Commodity code: 63
- Made-up articles of textile materials, incl. dress patterns, n.e.s. Commodity code: 63 07
  - Made-up articles of textile materials, incl. dress patterns, n.e.s. Commodity code: 63 07 90
    - Made-up articles of textile materials, incl. dress patterns, n.e.s. (excl. of felt, knitted or crocheted, single-use drapes used during surgical procedures made up of nonwovens, and protective face masks) Commodity code: 63 07 90 98
Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin Commodity code: 71
- Gold, incl. gold plated with platinum, unwrought or not further worked than semi-manufactured or in powder form Commodity code: 71 08
  - Gold, incl. gold plated with platinum, for non-monetary purposes Commodity code: 71 08 11
    - Gold, incl. gold plated with platinum, for non-monetary purposes Commodity code: 71 08 11 00
  - Gold, incl. gold plated with platinum, in semi-manufactured forms, for non-monetary purposes Commodity code: 71 08 13
    - Gold, incl. gold plated with platinum, in semi-manufactured forms, for non-monetary purposes (excl. sheets and strips of a thickness, excl. any backing, of > 0,15 mm and plates, bars, rods, wire and sections) Commodity code: 71 08 13 80
Iron and steel Commodity code: 72
- Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" Commodity code: 72 19
  - Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm Commodity code: 72 19 33
    - Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel Commodity code: 72 19 33 10
    - Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickel Commodity code: 72 19 33 90
Articles of iron or steel Commodity code: 73
- Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) Commodity code: 73 04
- Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" Commodity code: 73 05
  - Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel, welded (excl. welded products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil o Commodity code: 73 05 90
    - Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel, welded (excl. welded products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) Commodity code: 73 05 90 00
- Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406 Commodity code: 73 06
- Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel Commodity code: 73 07
- Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or Commodity code: 73 08
  - Structures and parts of structures, of iron or steel, n.e.s. (excl. bridges and bridge-sections, towers and lattice masts, doors and windows and their frames, thresholds for doors, props and similar equipment for scaffolding, shuttering, propping or Commodity code: 73 08 90
    - Structures and parts of structures, of iron or steel, solely or principally of sheet, n.e.s. (excl. doors and windows and their frames, and panels comprising two walls of profiled "ribbed" sheet, of iron or steel, with an insulating core) Commodity code: 73 08 90 59
    - Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) Commodity code: 73 08 90 98
- Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) Commodity code: 73 18
- Articles of iron or steel, cast, n.e.s. Commodity code: 73 25
  - Cast articles of iron or steel, n.e.s. (excl. articles of non-malleable cast iron, and grinding balls and similar articles for mills) Commodity code: 73 25 99
    - Articles of cast steel, n.e.s. (excl. grinding balls and similar articles for mills) Commodity code: 73 25 99 90
- Articles of iron or steel, n.e.s. (excl. cast articles) Commodity code: 73 26
  - Articles of iron or steel, n.e.s. (excl. cast articles or articles of iron or steel wire) Commodity code: 73 26 90
    - Reels for cables, piping and the like, of iron or steel Commodity code: 73 26 90 50
    - Articles of iron or steel, n.e.s. Commodity code: 73 26 90 98
Copper and articles thereof Commodity code: 74
- Copper tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 74 12
  - Copper alloy tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 74 12 20
    - Copper alloy tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 74 12 20 00
- Nails, tacks, drawing pins, staples and similar articles, of copper or with shafts of iron or steel and heads of copper, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers "incl. spring washers" and similar articles, of copper (e Commodity code: 74 15
  - Screws, bolts, nuts and similar articles, threaded, of copper (other than screw hooks, ring- and eyebolts, lag screws, plugs, bungs and the like, with screw thread) Commodity code: 74 15 33
    - Screws, bolts, nuts and similar articles, threaded, of copper (other than screw hooks, ring- and eyebolts, lag screws, plugs, bungs and the like, with screw thread) Commodity code: 74 15 33 00
  - Screw hooks, screw rings and the like, threaded, of copper (excl. standard screws and bolts and nuts) Commodity code: 74 15 39
    - Screw hooks, screw rings and the like, threaded, of copper (excl. standard screws and bolts and nuts) Commodity code: 74 15 39 00
Nickel and articles thereof Commodity code: 75
- Tubes, pipes and tube or pipe fittings "e.g., couplings, elbows, sleeves", of nickel Commodity code: 75 07
  - Tubes and pipes of nickel alloys Commodity code: 75 07 12
    - Tubes and pipes of nickel alloys Commodity code: 75 07 12 00
  - Tube or pipe fittings, of nickel Commodity code: 75 07 20
    - Tube or pipe fittings, of nickel Commodity code: 75 07 20 00
- Articles of nickel, n.e.s. (excl. powder, flakes, bars, profiles, wire, plates, sheets, strip, foil, tubes, pipes and tube or pipe fittings) Commodity code: 75 08
  - Articles of nickel, n.e.s. Commodity code: 75 08 90
    - Articles of nickel, n.e.s. Commodity code: 75 08 90 00
Aluminium and articles thereof Commodity code: 76
- Aluminium tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 76 09
  - Aluminium tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 76 09 00
    - Aluminium tube or pipe fittings "e.g., couplings, elbows, sleeves" Commodity code: 76 09 00 00
- Articles of aluminium, n.e.s. Commodity code: 76 16
Tin and articles thereof Commodity code: 80
- Articles of tin, n.e.s. Commodity code: 80 07
  - Articles of tin, n.e.s. Commodity code: 80 07 00
    - Articles of tin, n.e.s. Commodity code: 80 07 00 80
Other base metals; cermets; articles thereof Commodity code: 81
- Titanium and articles thereof, n.e.s.; titanium waste and scrap (excl. ash and residues containing titanium) Commodity code: 81 08
  - Titanium waste and scrap (excl. ash and residues containing titanium) Commodity code: 81 08 30
    - Titanium waste and scrap (excl. ash and residues containing titanium) Commodity code: 81 08 30 00
  - Articles of titanium, n.e.s. Commodity code: 81 08 90
    - Tubes and pipes, of titanium Commodity code: 81 08 90 60
    - Articles of titanium, n.e.s. Commodity code: 81 08 90 90
- Cermets and articles thereof, n.e.s.; waste and scrap of cermets (excl. ash and residues containing cermets) Commodity code: 81 13
  - Cermets and articles thereof, n.e.s.; waste and scrap of cermets (excl. ash and residues containing cermets) Commodity code: 81 13 00
    - Articles of cermets, n.e.s. Commodity code: 81 13 00 90
Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal Commodity code: 82
- Handsaws, with working parts of base metal (excl. power-operated saws); blades for saws of all kinds, incl. slitting, slotting or toothless saw blades, of base metal Commodity code: 82 02
  - Bandsaw blades of base metal Commodity code: 82 02 20
    - Bandsaw blades of base metal Commodity code: 82 02 20 00
- Hand tools, incl. glaziers' diamonds, of base metal, n.e.s.; blowlamps and the like; vices, clamps and the like (other than accessories for and parts of machine-tools or water-jet cutting machines); anvils; portable forges; hand-operated or pedal-ope Commodity code: 82 05
  - Hand tools, incl. glaziers' diamonds, of base metal, n.e.s. Commodity code: 82 05 59
    - Hand tools, incl. glaziers' diamonds, of base metal, n.e.s. Commodity code: 82 05 59 80
  - Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; sets of articles of two or more subheadings of heading 8205 Commodity code: 82 05 90
    - Sets of articles of two or more subheadings of heading 8205 Commodity code: 82 05 90 90
- Tools, interchangeable, for hand tools, whether or not power-operated, or for machine tools "e.g. for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving", incl. dies for drawing or extrudi Commodity code: 82 07
- Knives with cutting blades, serrated or not, incl. pruning knives, and blades therefor, of base metal (excl. straw knives, machetes, knives and cutting blades for machines or mechanical appliances, fish knives, butter knives, razors and razor blades Commodity code: 82 11
  - Handles of base metal for table knives, pocket knives and other knives of heading 8211 Commodity code: 82 11 95
    - Handles of base metal for table knives, pocket knives and other knives of heading 8211 Commodity code: 82 11 95 00
Miscellaneous articles of base metal Commodity code: 83
- Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with moun Commodity code: 83 02
- Flexible tubing of base metal, with or without fittings Commodity code: 83 07
  - Flexible tubing of base metal other than iron or steel, with or without fittings Commodity code: 83 07 90
    - Flexible tubing of base metal other than iron or steel, with or without fittings Commodity code: 83 07 90 00
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof Commodity code: 84
- Parts suitable for use solely or principally with internal combustion piston engine of heading 8407 or 8408 Commodity code: 84 09
  - Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s. Commodity code: 84 09 10
    - Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s. Commodity code: 84 09 10 00
  - Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s. Commodity code: 84 09 91
    - Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s. Commodity code: 84 09 91 00
  - Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s. Commodity code: 84 09 99
    - Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s. Commodity code: 84 09 99 00
- Turbojets, turbopropellers and other gas turbines Commodity code: 84 11
  - Turbojets of a thrust <= 25 kN Commodity code: 84 11 11
    - Turbojets of a thrust <= 25 kN Commodity code: 84 11 11 00
  - Turbojets of a thrust > 25 kN Commodity code: 84 11 12
    - Turbojets of a thrust > 132 kN Commodity code: 84 11 12 80
  - Parts of turbojets or turbopropellers, n.e.s. Commodity code: 84 11 91
    - Parts of turbojets or turbopropellers, n.e.s. Commodity code: 84 11 91 00
  - Parts of gas turbines, n.e.s. Commodity code: 84 11 99
    - Parts of gas turbines, n.e.s. Commodity code: 84 11 99 00
- Engines and motors (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines and electric motors); parts thereof Commodity code: 84 12
  - Parts of non-electrical engines and motors, n.e.s. Commodity code: 84 12 90
    - Parts of hydraulic power engines and motors, n.e.s. Commodity code: 84 12 90 40
- Pumps for liquids, whether or not fitted with a measuring device (excl. ceramic pumps and secretion aspirating pumps for medical use and medical pumps carried on or implanted in the body); liquid elevators (excl. pumps); parts thereof Commodity code: 84 13
  - Parts of pumps for liquids, n.e.s. Commodity code: 84 13 91
    - Parts of pumps for liquids, n.e.s. Commodity code: 84 13 91 00
- Air or vacuum pumps (excl. gas compound elevators and pneumatic elevators and conveyors); air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabin Commodity code: 84 14
  - Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s. Commodity code: 84 14 90
    - Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s. Commodity code: 84 14 90 00
- Machinery, plant or laboratory equipment whether or not electrically heated (excl. furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, Commodity code: 84 19
  - Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. Commodity code: 84 19 90
    - Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excl. of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circ Commodity code: 84 19 90 85
- Pulley tackle and hoists (other than skip hoists); winches and capstans; jacks Commodity code: 84 25
  - Winches and capstans powered by electric motor Commodity code: 84 25 31
    - Winches and capstans powered by electric motor Commodity code: 84 25 31 00
- Parts suitable for use solely or principally with the machinery of heading 8425 to 8430, n.e.s. Commodity code: 84 31
  - Parts of machinery of heading 8426, 8429 and 8430, n.e.s. Commodity code: 84 31 49
    - Parts of machinery of heading 8426, 8429 and 8430, n.e.s. Commodity code: 84 31 49 80
- Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excl. hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472); other Commodity code: 84 43
  - Parts and accessories of printers, copying machines and facsimile machines, n.e.s. (excl. of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) Commodity code: 84 43 99
    - Parts and accessories of printers, copying machines and facsimile machines, n.e.s. (excl. electronic assemblies and of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) Commodity code: 84 43 99 90
- Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447, e.g. dobbies, jacquards, automatic stop motions, shuttle changing mechanisms; parts and accessories suitable for use solely or principally with the machines of this headin Commodity code: 84 48
  - Parts and accessories of machines for extruding, drawing, texturing or cutting man-made textile materials or of their auxiliary machinery, n.e.s. Commodity code: 84 48 20
    - Parts and accessories of machines for extruding, drawing, texturing or cutting man-made textile materials or of their auxiliary machinery, n.e.s. Commodity code: 84 48 20 00
- Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products (excl. gear cutting, gear grinding or gear finishing machines of headin Commodity code: 84 60
  - Flat-surface grinding machines for finishing metal, not numerically controlled Commodity code: 84 60 19
    - Flat-surface grinding machines for finishing metal, not numerically controlled Commodity code: 84 60 19 00
  - Honing or lapping machines, for working metals, metal carbides or cermets (excl. gear cutting, gear grinding or gear finishing machines) Commodity code: 84 60 40
    - Honing or lapping machines, for finishing metals, metal carbides or cermets, not numerically controlled (other than gear finishing machines) Commodity code: 84 60 40 90
- Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal, sintered metal carbides or cermets, n.e.s. Commodity code: 84 61
  - Planing machines and other machine tools for working metals, metal carbides or cermets by removing material, n.e.s. Commodity code: 84 61 90
    - Planing machines and other machine tools for working metals, metal carbides or cermets by removing material, n.e.s. Commodity code: 84 61 90 00
- Machine tools, incl. presses, for working metal by forging, hammering or die forging (excl. rolling mills); machine tools, incl. presses, slitting lines and cut-to-length lines, for working metal by bending, folding, straightening, flattening, sheari Commodity code: 84 62
  - Machine tools, incl. presses, for working metal by forging, hammering or die forging (excl. rolling mills), and machine tools, incl. presses, for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling ( Commodity code: 84 62 90
    - Machine tools, incl. presses, for working metal by forging, hammering or die forging (excl. rolling mills), and machine tools, incl. presses, for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excl. draw-benches), and presses for working metal or metal carbides (excl. machines of 8456 to 8462.69, and numerically controlled) Commodity code: 84 62 90 90
- Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty Commodity code: 84 66
  - Work holders for machine tools Commodity code: 84 66 20
    - Work holders for machine tools in the form of jigs and fixtures for specific applications, incl. sets of standard jig and fixture components Commodity code: 84 66 20 20
  - Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s. Commodity code: 84 66 93
    - Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s. Commodity code: 84 66 93 60
  - Parts and accessories for machine tools for working metal without removing material, n.e.s. Commodity code: 84 66 94
    - Parts and accessories for machine tools for working metal without removing material, n.e.s. Commodity code: 84 66 94 00
- Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof Commodity code: 84 67
  - Tools for working in the hand, hydraulic or with self-contained non-electric motor (excl. chainsaws and pneumatic tools) Commodity code: 84 67 89
    - Tools for working in the hand, hydraulic or with self-contained non-electric motor (excl. chainsaws and pneumatic tools) Commodity code: 84 67 89 00
- Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s. Commodity code: 84 71
  - Data-processing machines, automatic, comprising in the same housing at least a central processing unit, and one input unit and one output unit, whether or not combined (excl. portable weighing <= 10 kg and excl. those presented in the form of systems Commodity code: 84 71 41
    - Data-processing machines, automatic, comprising in the same housing at least a central processing unit, and one input unit and one output unit, whether or not combined (excl. portable weighing <= 10 kg and excl. those presented in the form of systems and peripheral units) Commodity code: 84 71 41 00
  - Storage units for automatic data-processing machines Commodity code: 84 71 70
    - Storage units for automatic data-processing machines (excl. disk, magnetic tape and central storage units) Commodity code: 84 71 70 98
- Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of heading 8469 to 8472, n.e.s. Commodity code: 84 73
  - Parts and accessories of automatic data-processing machines or for other machines of heading 8471, n.e.s. Commodity code: 84 73 30
    - Parts and accessories of automatic data-processing machines or for other machines of heading 8471, n.e.s. (excl. electronic assemblies) Commodity code: 84 73 30 80
- Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter, parts thereof Commodity code: 84 77
  - Parts of machinery for working rubber or plastics or for the manufacture of products from these materials, n.e.s. Commodity code: 84 77 90
    - Parts of machinery for working rubber or plastics or for the manufacture of products from these materials of subheading 8477.10.00 to 8477.80.99, n.e.s. (excl. parts of machines for the manufacture of semiconductor devices or of electronic integrated circuits, and of cast iron or cast steel) Commodity code: 84 77 90 80
- Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof Commodity code: 84 79
  - Parts of machines and mechanical appliances, n.e.s. Commodity code: 84 79 90
    - Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel) Commodity code: 84 79 90 70
- Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, incl. pressure-reducing valves and thermostatically controlled valves; parts thereof Commodity code: 84 81
  - Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s. Commodity code: 84 81 90
    - Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s. Commodity code: 84 81 90 00
- Transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, i Commodity code: 84 83
  - Clutches and shaft couplings, incl. universal joints, for machinery Commodity code: 84 83 60
    - Clutches and shaft couplings, incl. universal joints, of cast iron or cast steel Commodity code: 84 83 60 20
    - Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel) Commodity code: 84 83 60 80
  - Toothed wheels, chain sprockets and other transmission elements presented separately; parts of transmission shafts, ball screws, couplings and other articles of heading 8483, n.e.s. Commodity code: 84 83 90
    - Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel) Commodity code: 84 83 90 89
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles Commodity code: 85
- Electric motors and generators (excl. generating sets) Commodity code: 85 01
  - DC motors and DC generators of an output > 750 W but <= 75 kW (excl. photovoltaic generators) Commodity code: 85 01 32
    - DC motors and DC generators of an output > 750 W but <= 75 kW (excl. photovoltaic generators) Commodity code: 85 01 32 00
- Electrical transformers, static converters, e.g. rectifiers, and inductors; parts thereof Commodity code: 85 04
  - Static converters Commodity code: 85 04 40
    - Static converters (excl. of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, battery chargers, polycrystalline semiconductor and other rectifiers, and a.c. converters) Commodity code: 85 04 40 90
  - Inductors (excl. inductors for discharge lamps or tubes) Commodity code: 85 04 50
    - Inductors (excl. inductors for discharge lamps or tubes) Commodity code: 85 04 50 00
- Radar apparatus, radio navigational aid apparatus and radio remote control apparatus Commodity code: 85 26
  - Radio navigational aid apparatus Commodity code: 85 26 91
    - Radio navigational receivers (excl. radar apparatus) Commodity code: 85 26 91 20
- Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and junction boxes, for a voltage <= 1.000 V Commodity code: 85 36
  - Electrical apparatus for switching electrical circuits, or for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, automatic circuit breakers and other apparatus for protecting electrical circuits, relays and other Commodity code: 85 36 90
    - Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps) Commodity code: 85 36 90 95
- Electrical insulators of any material (excl. insulating fittings) Commodity code: 85 46
  - Electrical insulators (excl. those of glass or ceramics and insulating fittings) Commodity code: 85 46 90
    - Electrical insulators (excl. those of glass, ceramics or plastics and insulating fittings) Commodity code: 85 46 90 90
Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof Commodity code: 87
- Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor ve Commodity code: 87 08
  - Suspension systems and parts thereof, incl. shock-absorbers, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transpor Commodity code: 87 08 80
    - Suspension systems and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20, shock-absorbers, anti roll Commodity code: 87 08 80 99
Aircraft, spacecraft, and parts thereof Commodity code: 88
- Parts of aircraft and spacecraft of heading 8801, 8802 or 8806, n.e.s. Commodity code: 88 07
  - Parts of aeroplanes, helicopters or unmanned aircraft, n.e.s. (excl. those for gliders) Commodity code: 88 07 30
    - Parts of aeroplanes, helicopters or unmanned aircraft, n.e.s. (excl. those for gliders) Commodity code: 88 07 30 00
Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof Commodity code: 90
- Instruments and appliances used in medical, surgical, dental or veterinary sciences, incl. scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments, n.e.s. Commodity code: 90 18
  - Instruments and appliances used in medical, surgical or veterinary sciences, n.e.s. Commodity code: 90 18 90
    - Instruments and appliances used in medical, surgical or veterinary sciences, n.e.s. Commodity code: 90 18 90 84
- Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, e.g. flow meters, level gauges, manometers, heat meters (excl. instruments and apparatus of heading 9014, 9015, 9028 or 9032) Commodity code: 90 26
  - Instruments and apparatus for measuring or checking pressure of liquids or gases (excl. regulators) Commodity code: 90 26 20
    - Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators) Commodity code: 90 26 20 80
- Instruments and apparatus for physical or chemical analysis, e.g. polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus; instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the Commodity code: 90 27
  - Spectrometers, spectrophotometers and spectrographs using optical radiations, such as UV, visible, IR Commodity code: 90 27 30
    - Spectrometers, spectrophotometers and spectrographs using optical radiations, such as UV, visible, IR Commodity code: 90 27 30 00
- Measuring or checking instruments, appliances and machines not elsewhere specified in chapter 90; profile projectors Commodity code: 90 31
  - Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s. Commodity code: 90 31 90
    - Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s. Commodity code: 90 31 90 00

Exported commodities