DYNAMIC METALS LTD
Business address
40 EDEN WAY CHARTWELL BUSINESS PARK LEIGHTON BUZZARD BEDFORDSHIRE LU7 4FYCommodities traded
Download trade history for DYNAMIC METALS LTD (CSV)
Imported commodities
-
Wood and articles of wood; wood charcoal
Commodity code: 44
-
Iron and steel
Commodity code: 72
-
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated
Commodity code: 72 08
-
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Commodity code: 72 08 52
- Flat-rolled products of iron or non-alloy steel, of a width of < 2.050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width <= 1.250 mm) Commodity code: 72 08 52 99
-
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, without patterns in relief
Commodity code: 72 08 53
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width <= 1.250 mm and of a thickness of >= 4 mm) Commodity code: 72 08 53 90
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief Commodity code: 72 08 54
- Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated Commodity code: 72 08 90
-
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Commodity code: 72 08 52
- Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel Commodity code: 72 18
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 19
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm Commodity code: 72 19 11
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm Commodity code: 72 19 21
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm
Commodity code: 72 19 22
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5% nickel Commodity code: 72 19 22 10
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5% nickel Commodity code: 72 19 22 90
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm Commodity code: 72 19 23
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm Commodity code: 72 19 24
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm Commodity code: 72 19 31
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm Commodity code: 72 19 32
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm
Commodity code: 72 19 33
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel Commodity code: 72 19 33 10
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickel Commodity code: 72 19 33 90
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm
Commodity code: 72 19 34
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickel Commodity code: 72 19 34 10
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight < 2,5% nickel Commodity code: 72 19 34 90
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm Commodity code: 72 19 35
-
Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 20
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm Commodity code: 72 20 11
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm Commodity code: 72 20 12
-
Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced"
Commodity code: 72 20 20
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickel Commodity code: 72 20 20 21
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel Commodity code: 72 20 20 41
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel Commodity code: 72 20 20 49
-
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s.
Commodity code: 72 22
-
Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section
Commodity code: 72 22 11
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel Commodity code: 72 22 11 11
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickel Commodity code: 72 22 11 19
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 11 81
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickel Commodity code: 72 22 11 89
-
Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section)
Commodity code: 72 22 19
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) Commodity code: 72 22 19 10
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight < 2,5% nickel (excl. such products of circular cross-section) Commodity code: 72 22 19 90
-
Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished
Commodity code: 72 22 20
- Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel Commodity code: 72 22 20 11
- Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight < 2,5% nickel Commodity code: 72 22 20 19
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 20 21
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel Commodity code: 72 22 20 29
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 20 31
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickel Commodity code: 72 22 20 39
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) Commodity code: 72 22 20 81
-
Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.
Commodity code: 72 22 30
- Other bars and rods of stainless steel, containing by weight >= 2,5% of nickel, forged Commodity code: 72 22 30 51
- Other bars and rods of stainless steel, containing by weight < 2,5% of nickel, forged Commodity code: 72 22 30 91
- Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, n.e.s. (excl. forged products) Commodity code: 72 22 30 97
-
Angles, shapes and sections of stainless steel, n.e.s.
Commodity code: 72 22 40
- Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded Commodity code: 72 22 40 10
- Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. Commodity code: 72 22 40 90
-
Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section
Commodity code: 72 22 11
- Wire of stainless steel, in coils (excl. bars and rods) Commodity code: 72 23
- Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) Commodity code: 72 24
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 25
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel)
Commodity code: 72 25 40
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 40
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 60
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 90
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) Commodity code: 72 25 50
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) Commodity code: 72 25 99
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel)
Commodity code: 72 25 40
-
Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 26
- Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) Commodity code: 72 26 91
- Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) Commodity code: 72 26 92
-
Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel
Commodity code: 72 28
-
Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i
Commodity code: 72 28 30
- Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 61
- Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 69
- Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 40
-
Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu
Commodity code: 72 28 50
- Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 20
- Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 40
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 61
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 69
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excl. of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 80
-
Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products an
Commodity code: 72 28 60
- Bars and rods of alloy steel, other than stainless steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. bars and rods of high-speed steel, silico-manganese steel or tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 60 80
-
Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i
Commodity code: 72 28 30
-
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated
Commodity code: 72 08
-
Articles of iron or steel
Commodity code: 73
-
Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)
Commodity code: 73 04
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas)
Commodity code: 73 04 49
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced", of an external diameter of > 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and tubes, pipes and hollow profiles of heading 7304.49.10) Commodity code: 73 04 49 99
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilli
Commodity code: 73 04 51
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced", straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) Commodity code: 73 04 51 10
- Precision tubes, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil and tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chr Commodity code: 73 04 51 81
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and , pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% ca Commodity code: 73 04 51 89
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for dr
Commodity code: 73 04 59
- Tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) Commodity code: 73 04 59 30
- Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) Commodity code: 73 04 90
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas)
Commodity code: 73 04 49
- Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel Commodity code: 73 07
- Articles of iron or steel, n.e.s. (excl. cast articles) Commodity code: 73 26
-
Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)
Commodity code: 73 04
- Rubber and articles thereof Commodity code: 40
-
Paper and paperboard; articles of paper pulp, paper or paperboard
Commodity code: 48
- Corrugated paper and paperboard "with or without glued flat surface sheets", creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded sta Commodity code: 48 08
-
Books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans
Commodity code: 49
- Printed books, brochures and similar printed matter, whether or not in single sheets (excl. periodicals and publications which are essentially devoted to advertising) Commodity code: 49 01
-
Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin
Commodity code: 71
-
Gold, incl. gold plated with platinum, unwrought or not further worked than semi-manufactured or in powder form
Commodity code: 71 08
-
Gold, incl. gold plated with platinum, in semi-manufactured forms, for non-monetary purposes
Commodity code: 71 08 13
- Bars, rods, wire and sections, plates, sheets and strips of a thickness, excl. any backing, of > 0,15 mm, of gold, incl. gold plated with platinum Commodity code: 71 08 13 10
- Gold, incl. gold plated with platinum, in semi-manufactured forms, for non-monetary purposes (excl. sheets and strips of a thickness, excl. any backing, of > 0,15 mm and plates, bars, rods, wire and sections) Commodity code: 71 08 13 80
-
Gold, incl. gold plated with platinum, in semi-manufactured forms, for non-monetary purposes
Commodity code: 71 08 13
- Articles of precious metal or of metal clad with precious metal, n.e.s. Commodity code: 71 15
-
Gold, incl. gold plated with platinum, unwrought or not further worked than semi-manufactured or in powder form
Commodity code: 71 08
-
Copper and articles thereof
Commodity code: 74
- Bars, rods and profiles, of copper, n.e.s. Commodity code: 74 07
- Other articles of copper, n.e.s. Commodity code: 74 19
-
Nickel and articles thereof
Commodity code: 75
- Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy : Commodity code: 75 01
- Unwrought nickel Commodity code: 75 02
-
Bars, rods, profiles and wire, of nickel (excl. electrically insulated products)
Commodity code: 75 05
- Bars, rods, profiles and wire, of non-alloy nickel, n.e.s. (excl. electrically insulated products) Commodity code: 75 05 11
- Bars, rods, profiles and wire, of nickel alloys, n.e.s. (excl. electrically insulated products) Commodity code: 75 05 12
- Wire of non-alloy nickel (excl. electrically insulated products) Commodity code: 75 05 21
- Wire of nickel alloys (excl. electrically insulated products) Commodity code: 75 05 22
- Plates, sheets, strip and foil, of nickel (excl. expanded plates, sheets or strip) Commodity code: 75 06
- Tubes, pipes and tube or pipe fittings "e.g., couplings, elbows, sleeves", of nickel Commodity code: 75 07
- Articles of nickel, n.e.s. (excl. powder, flakes, bars, profiles, wire, plates, sheets, strip, foil, tubes, pipes and tube or pipe fittings) Commodity code: 75 08
-
Aluminium and articles thereof
Commodity code: 76
- Bars, rods and profiles, of aluminium, n.e.s. Commodity code: 76 04
-
Plates, sheets and strip, of aluminium, of a thickness of > 0,2 mm (excl. expanded plates, sheets and strip)
Commodity code: 76 06
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock) Commodity code: 76 06 12 20
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) Commodity code: 76 06 12 92
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 93
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 99
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular) Commodity code: 76 06 92
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
- Aluminium tubes and pipes (excl. hollow profiles) Commodity code: 76 08
- Articles of aluminium, n.e.s. Commodity code: 76 16
-
Other base metals; cermets; articles thereof
Commodity code: 81
- Magnesium and articles thereof, n.e.s.; magnesium waste and scrap (excl. ash and residues containing magnesium) Commodity code: 81 04
- Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, n.e.s.; cobalt waste and scrap (excl. ash and residues containing cobalt) Commodity code: 81 05
- Titanium and articles thereof, n.e.s.; titanium waste and scrap (excl. ash and residues containing titanium) Commodity code: 81 08
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
- Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers; parts thereof (excl. coke ovens, electrolytic process gas generators and carbid Commodity code: 84 05
- Turbojets, turbopropellers and other gas turbines Commodity code: 84 11
- Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof Commodity code: 84 79
- Furniture; medical and surgical furniture; bedding, mattresses, mattress supports,cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified; illuminated signs, illuminatedname-plates and the like; prefabricated bu Commodity code: 94
Exported commodities
-
Iron and steel
Commodity code: 72
- Semi-finished products of iron or non-alloy steel Commodity code: 72 07
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated Commodity code: 72 09
- Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated Commodity code: 72 11
-
Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)
Commodity code: 72 14
-
Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling
Commodity code: 72 14 99
- Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) Commodity code: 72 14 99 31
- Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, o Commodity code: 72 14 99 50
-
Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling
Commodity code: 72 14 99
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 19
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm
Commodity code: 72 19 21
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight >= 2,5 nickel Commodity code: 72 19 21 10
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight < 2,5 nickel Commodity code: 72 19 21 90
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm Commodity code: 72 19 22
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm Commodity code: 72 19 32
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm
Commodity code: 72 19 33
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel Commodity code: 72 19 33 10
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickel Commodity code: 72 19 33 90
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm Commodity code: 72 19 34
- Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm Commodity code: 72 19 35
-
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm
Commodity code: 72 19 21
-
Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 20
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm Commodity code: 72 20 11
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm Commodity code: 72 20 12
-
Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced"
Commodity code: 72 20 20
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickel Commodity code: 72 20 20 21
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel Commodity code: 72 20 20 41
- Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel Commodity code: 72 20 20 49
- Bars and rods of stainless steel, hot-rolled, in irregularly wound coils Commodity code: 72 21
-
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s.
Commodity code: 72 22
-
Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section
Commodity code: 72 22 11
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel Commodity code: 72 22 11 11
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickel Commodity code: 72 22 11 19
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 11 81
- Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickel Commodity code: 72 22 11 89
- Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) Commodity code: 72 22 19
-
Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished
Commodity code: 72 22 20
- Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel Commodity code: 72 22 20 11
- Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight < 2,5% nickel Commodity code: 72 22 20 19
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 20 21
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel Commodity code: 72 22 20 29
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel Commodity code: 72 22 20 31
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickel Commodity code: 72 22 20 39
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) Commodity code: 72 22 20 81
- Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section) Commodity code: 72 22 20 89
- Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. Commodity code: 72 22 30
-
Angles, shapes and sections of stainless steel, n.e.s.
Commodity code: 72 22 40
- Angles, shapes and sections of stainless steel, not further worked than cold-formed or cold-finished Commodity code: 72 22 40 50
- Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. Commodity code: 72 22 40 90
-
Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section
Commodity code: 72 22 11
- Wire of stainless steel, in coils (excl. bars and rods) Commodity code: 72 23
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 25
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel)
Commodity code: 72 25 40
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 40
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 60
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) Commodity code: 72 25 40 90
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) Commodity code: 72 25 50
-
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel)
Commodity code: 72 25 40
-
Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced"
Commodity code: 72 26
-
Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel)
Commodity code: 72 26 91
- Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) Commodity code: 72 26 91 91
- Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of < 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) Commodity code: 72 26 91 99
- Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) Commodity code: 72 26 92
-
Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel)
Commodity code: 72 26 91
-
Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel
Commodity code: 72 28
-
Bars and rods of high-speed steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
Commodity code: 72 28 10
- Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 10 90
-
Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i
Commodity code: 72 28 30
- Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 20
- Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 61
- Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 69
- Bars and rods of alloy steel other than stainless steel, of rectangular "other than square" cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 70
- Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods Commodity code: 72 28 30 89
- Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 40
-
Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu
Commodity code: 72 28 50
- Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 20
- Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 40
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 61
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 69
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excl. of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 80
-
Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products an
Commodity code: 72 28 60
- Bars and rods of alloy steel, other than stainless steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. bars and rods of high-speed steel, silico-manganese steel or tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 60 80
- Hollow drill bars and rods, of alloy or non-alloy steel Commodity code: 72 28 80
-
Bars and rods of high-speed steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
Commodity code: 72 28 10
- Wire of alloy steel other than stainless, in coils (excl. bars and rods) Commodity code: 72 29
-
Articles of iron or steel
Commodity code: 73
-
Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)
Commodity code: 73 04
- Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) Commodity code: 73 04 29
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas Commodity code: 73 04 41
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas)
Commodity code: 73 04 49
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) Commodity code: 73 04 49 83
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) Commodity code: 73 04 49 85
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) Commodity code: 73 04 49 89
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced", of an external diameter of <= 168,3 mm (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and tubes, pipes and hollow profiles of heading 7304.49.10) Commodity code: 73 04 49 93
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced", of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and tubes, pipes and hollow profiles of heading 7304.49.10) Commodity code: 73 04 49 95
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilli
Commodity code: 73 04 51
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced", straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum, of a length of > 0,5 m (excl. tubes, pipes and hollow profiles of subheadin Commodity code: 73 04 51 18
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and , pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% ca Commodity code: 73 04 51 89
-
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for dr
Commodity code: 73 04 59
- Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) Commodity code: 73 04 59 82
- Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) Commodity code: 73 18
-
Articles of iron or steel, n.e.s. (excl. cast articles)
Commodity code: 73 26
- Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked Commodity code: 73 26 11
- Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) Commodity code: 73 26 19
- Articles of iron or steel, n.e.s. (excl. cast articles or articles of iron or steel wire) Commodity code: 73 26 90
-
Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)
Commodity code: 73 04
-
Aluminium and articles thereof
Commodity code: 76
- Bars, rods and profiles, of aluminium, n.e.s. Commodity code: 76 04
-
Plates, sheets and strip, of aluminium, of a thickness of > 0,2 mm (excl. expanded plates, sheets and strip)
Commodity code: 76 06
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock) Commodity code: 76 06 12 20
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) Commodity code: 76 06 12 50
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) Commodity code: 76 06 12 92
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 93
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 99
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular) Commodity code: 76 06 92
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
- Aluminium tubes and pipes (excl. hollow profiles) Commodity code: 76 08
-
Other base metals; cermets; articles thereof
Commodity code: 81
- Magnesium and articles thereof, n.e.s.; magnesium waste and scrap (excl. ash and residues containing magnesium) Commodity code: 81 04
- Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, n.e.s.; cobalt waste and scrap (excl. ash and residues containing cobalt) Commodity code: 81 05
- Titanium and articles thereof, n.e.s.; titanium waste and scrap (excl. ash and residues containing titanium) Commodity code: 81 08
-
Plastics and plastic products
Commodity code: 39
-
Articles for the conveyance or packaging of goods, of plastics; stoppers, lids, caps and other closures, of plastics
Commodity code: 39 23
-
Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lid
Commodity code: 39 23 90
- Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures) Commodity code: 39 23 90 00
-
Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lid
Commodity code: 39 23 90
- Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. Commodity code: 39 26
-
Articles for the conveyance or packaging of goods, of plastics; stoppers, lids, caps and other closures, of plastics
Commodity code: 39 23
-
Books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans
Commodity code: 49
- Printed books, brochures and similar printed matter, whether or not in single sheets (excl. periodicals and publications which are essentially devoted to advertising) Commodity code: 49 01
-
Copper and articles thereof
Commodity code: 74
- Bars, rods and profiles, of copper, n.e.s. Commodity code: 74 07
- Copper tubes and pipes Commodity code: 74 11
-
Nickel and articles thereof
Commodity code: 75
- Unwrought nickel Commodity code: 75 02
- Bars, rods, profiles and wire, of nickel (excl. electrically insulated products) Commodity code: 75 05
- Plates, sheets, strip and foil, of nickel (excl. expanded plates, sheets or strip) Commodity code: 75 06
- Tubes, pipes and tube or pipe fittings "e.g., couplings, elbows, sleeves", of nickel Commodity code: 75 07
- Articles of nickel, n.e.s. (excl. powder, flakes, bars, profiles, wire, plates, sheets, strip, foil, tubes, pipes and tube or pipe fittings) Commodity code: 75 08
- Lead and articles thereof Commodity code: 78
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
- Parts suitable for use solely or principally with the machinery of heading 8425 to 8430, n.e.s. Commodity code: 84 31
-
Bookbinding machinery, incl. book-sewing machines (excl. machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing); parts thereof
Commodity code: 84 40
-
Bookbinding machinery, incl. book-sewing machines (excl. machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing)
Commodity code: 84 40 10
- Bookbinding machinery (excl. machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing, folding machines, collating machines, gathering machines, sewing, wire stitching and stapling machines and unsewn binding machines) Commodity code: 84 40 10 90
-
Bookbinding machinery, incl. book-sewing machines (excl. machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing)
Commodity code: 84 40 10
- Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excl. hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472); other Commodity code: 84 43
-
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
Commodity code: 85
- Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. Commodity code: 85 03
- Telephone sets, incl. smartphones and other telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, incl. apparatus for communication in a wired or wireless ne Commodity code: 85 17