PARKERSTEEL LIMITED
Business address
VAUXHALL INDUSTRIAL ROAD CANTERBURY KENT CT1 1HDCommodities traded
Download trade history for PARKERSTEEL LIMITED (CSV)
Imported commodities
-
Iron and steel
Commodity code: 72
- Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) Commodity code: 72 05
-
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated
Commodity code: 72 08
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process Commodity code: 72 08 40
-
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm, without patterns in relief
Commodity code: 72 08 51
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief Commodity code: 72 08 51 20
- Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief (excl. "wide flats") Commodity code: 72 08 51 91
- Flat-rolled products of iron or non-alloy steel, of a width of < 2.050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief Commodity code: 72 08 51 98
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief Commodity code: 72 08 52
- Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated Commodity code: 72 11
-
Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)
Commodity code: 72 14
-
Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling
Commodity code: 72 14 91
- Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) Commodity code: 72 14 91 10
-
Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling
Commodity code: 72 14 99
- Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) Commodity code: 72 14 99 39
- Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, o Commodity code: 72 14 99 50
-
Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling
Commodity code: 72 14 91
-
Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s.
Commodity code: 72 15
- Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished Commodity code: 72 15 10
-
Bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel)
Commodity code: 72 15 50
- Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon of rectangular "other than square" cross-section (excl. those of free-cutting steel) Commodity code: 72 15 50 11
- Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon, of square or other than rectangular cross-section (excl. those of free-cutting steel) Commodity code: 72 15 50 19
- Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight >= 0,25% of carbon (excl. those of free-cutting steel) Commodity code: 72 15 50 80
-
Angles, shapes and sections of iron or non-alloy steel, n.e.s.
Commodity code: 72 16
- U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm Commodity code: 72 16 10
- L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm Commodity code: 72 16 21
- T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm Commodity code: 72 16 22
- U sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 31
-
I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm
Commodity code: 72 16 32
- I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm Commodity code: 72 16 32 11
- I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm Commodity code: 72 16 32 91
- H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 33
- L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 40
- Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. U, I, H, L or T sections) Commodity code: 72 16 50
- Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) Commodity code: 72 16 69
- Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. Commodity code: 72 22
- Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" Commodity code: 72 25
- Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" Commodity code: 72 26
-
Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel
Commodity code: 72 28
-
Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i
Commodity code: 72 28 30
- Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 69
- Bars and rods of alloy steel other than stainless steel, of rectangular "other than square" cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 30 70
- Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods Commodity code: 72 28 30 89
-
Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu
Commodity code: 72 28 50
- Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Commodity code: 72 28 50 69
- Angles, shapes and sections of alloy steel other than stainless, n.e.s. Commodity code: 72 28 70
-
Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i
Commodity code: 72 28 30
-
Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter;paints and varnishes; putty and other mastics; inks
Commodity code: 32
- Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium Commodity code: 32 09
-
Wood and articles of wood; wood charcoal
Commodity code: 44
-
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm
Commodity code: 44 07
-
Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. of S-P-F spruce&pine&fir)
Commodity code: 44 07 11
- Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, planed (excl. end-jointed, and of S-P-F spruce&pine&fir) Commodity code: 44 07 11 20
- Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. end-jointed, planed, and of S-P-F spruce&pine&fir) Commodity code: 44 07 11 90
-
Fir "Abies spp." and spruce "Picea spp." sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. of S-P-F spruce&pine&fir)
Commodity code: 44 07 12
- Fir "Abies spp." and spruce "Picea spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, planed (excl. end-jointed, and of S-P-F spruce&pine&fir) Commodity code: 44 07 12 20
- Fir "Abies spp." and spruce "Picea spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. end-jointed, planed, and of S-P-F spruce&pine&fir) Commodity code: 44 07 12 90
-
Wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. tropical wood, coniferous wood, oak "Quercus spp.", beech "Fagus spp.", maple "Acer spp.", cherry "Prunus spp.", ash "Fr
Commodity code: 44 07 99
- Wood, sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. planed, sanded or end-jointed; tropical wood, coniferous wood, oak "Quercus spp.", beech "Fagus spp.", maple "Acer spp.", cherry "Prunus spp.", ash "Fraxinus spp.", birch "Betula spp.", poplar and aspen "Populus spp.") Commodity code: 44 07 99 90
-
Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. of S-P-F spruce&pine&fir)
Commodity code: 44 07 11
-
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm
Commodity code: 44 07
-
Articles of iron or steel
Commodity code: 73
-
Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406
Commodity code: 73 06
-
Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pi
Commodity code: 73 06 30
- Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") Commodity code: 73 06 30 77
- Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") Commodity code: 73 06 30 80
-
Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel
Commodity code: 73 06 61
- Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm Commodity code: 73 06 61 92
- Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm Commodity code: 73 06 61 99
-
Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pi
Commodity code: 73 06 30
- Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel Commodity code: 73 07
-
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded)
Commodity code: 73 18
- Screw hooks and screw rings, of iron or steel Commodity code: 73 18 13
-
Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded)
Commodity code: 73 18 15
- Screws and bolts, of iron or steel "whether or not with their nuts and washers", for fixing railway track construction material (excl. coach screws) Commodity code: 73 18 15 20
- Screws and bolts, of stainless steel "whether or not with their nuts and washers", without heads (excl. screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 35
- Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 42
- Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 48
- Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with slotted or cross-recessed heads (excl. wood screws and self-tapping screws) Commodity code: 73 18 15 58
- Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 68
- Hexagon screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 75
- Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 88
- Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) Commodity code: 73 18 15 95
- Nuts of iron or steel Commodity code: 73 18 16
- Threaded articles, of iron or steel, n.e.s. Commodity code: 73 18 19
-
Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406
Commodity code: 73 06
-
Aluminium and articles thereof
Commodity code: 76
-
Plates, sheets and strip, of aluminium, of a thickness of > 0,2 mm (excl. expanded plates, sheets and strip)
Commodity code: 76 06
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
- Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) Commodity code: 76 06 12 92
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 93
- Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) Commodity code: 76 06 12 99
-
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip)
Commodity code: 76 06 12
-
Plates, sheets and strip, of aluminium, of a thickness of > 0,2 mm (excl. expanded plates, sheets and strip)
Commodity code: 76 06
-
Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
Commodity code: 82
- Handsaws, with working parts of base metal (excl. power-operated saws); blades for saws of all kinds, incl. slitting, slotting or toothless saw blades, of base metal Commodity code: 82 02
- Hand-operated spanners and wrenches, incl. torque meter wrenches (excl. tap wrenches), of base metal; interchangeable spanner sockets, with or without handles, of base metal Commodity code: 82 04
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
-
Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.; fire extinguishers, charged or not (excl. fire-extinguishing bombs and grenades); spray guns and similar appliances (excl. electri
Commodity code: 84 24
- Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s. Commodity code: 84 24 89
- Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s. Commodity code: 84 24 90
- Lifting, handling, loading or unloading machinery, e.g. lifts, escalators, conveyors, teleferics (excl. pulley tackle and hoists, winches and capstans, jacks, cranes of all kinds, mobile lifting frames and straddle carriers, works trucks fitted with Commodity code: 84 28
- Machine tools, incl. way-type unit head machines, for drilling, boring, milling, threading or tapping (excl. lathes and turning centres of heading 8458, gear cutting machines of heading 8461 and hand-operated machines) Commodity code: 84 59
- Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal, sintered metal carbides or cermets, n.e.s. Commodity code: 84 61
-
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty
Commodity code: 84 66
-
Tool holders, incl. tool holders for any type of tool for working in the hand, and self-opening dieheads, for machine tools
Commodity code: 84 66 10
- Arbors, collets and sleeves for use as tool holders in machine tools, incl. tool holders for any type of tool for working in the hand Commodity code: 84 66 10 20
- Tool holders for machine tools, incl. tool holders for any type of tool for working in the hand (excl. tool holders for lathes, arbors, collets and sleeves) Commodity code: 84 66 10 38
-
Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s.
Commodity code: 84 66 93
- Parts and accessories of machines of subheadings 84561110, 84561210, 845620, 845630, 845710, 845891, 84592100, 845961 or 846150 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines Commodity code: 84 66 93 40
- Parts and accessories for machine tools for working metal without removing material, n.e.s. Commodity code: 84 66 94
-
Tool holders, incl. tool holders for any type of tool for working in the hand, and self-opening dieheads, for machine tools
Commodity code: 84 66 10
- Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof Commodity code: 84 67
- Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof Commodity code: 84 79
- Transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, i Commodity code: 84 83
-
Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.; fire extinguishers, charged or not (excl. fire-extinguishing bombs and grenades); spray guns and similar appliances (excl. electri
Commodity code: 84 24
-
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
Commodity code: 85
- Electrical transformers, static converters, e.g. rectifiers, and inductors; parts thereof Commodity code: 85 04
- Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, incl. those incorporating instruments or apparatus of chapter 90, and num Commodity code: 85 37
Exported commodities
-
Articles of stone, plaster, cement, asbestos, mica or similar materials
Commodity code: 68
-
Millstones, grindstones, grinding wheels and the like, without frameworks, for milling, grinding, pulping, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or
Commodity code: 68 04
-
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated synthetic or natural diamond (excl. hand sharpening or polishing stones, and grinding wheels etc. specifically f
Commodity code: 68 04 21
- Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated synthetic or natural diamond (excl. hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines) Commodity code: 68 04 21 00
-
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated abrasives or ceramics (excl. of agglomerated synthetic or natural diamond, hand sharpening or polishing stones,
Commodity code: 68 04 22
- Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, reinforced (excl. of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) Commodity code: 68 04 22 18
-
Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated synthetic or natural diamond (excl. hand sharpening or polishing stones, and grinding wheels etc. specifically f
Commodity code: 68 04 21
-
Millstones, grindstones, grinding wheels and the like, without frameworks, for milling, grinding, pulping, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or
Commodity code: 68 04
-
Iron and steel
Commodity code: 72
- Semi-finished products of iron or non-alloy steel Commodity code: 72 07
-
Angles, shapes and sections of iron or non-alloy steel, n.e.s.
Commodity code: 72 16
- U sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 31
- I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 32
- H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm Commodity code: 72 16 33
- Angles, shapes and sections, of iron or non-alloy steel, from flat-rolled products simply cold-formed or cold-finished (excl. profiled sheet) Commodity code: 72 16 61
-
Articles of iron or steel
Commodity code: 73
-
Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406
Commodity code: 73 06
-
Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pi
Commodity code: 73 06 30
- Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") Commodity code: 73 06 30 80
-
Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pi
Commodity code: 73 06 30
- Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel Commodity code: 73 07
-
Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or
Commodity code: 73 08
- Bridges and bridge-sections, of iron or steel Commodity code: 73 08 10
- Structures and parts of structures, of iron or steel, n.e.s. (excl. bridges and bridge-sections, towers and lattice masts, doors and windows and their frames, thresholds for doors, props and similar equipment for scaffolding, shuttering, propping or Commodity code: 73 08 90
-
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded)
Commodity code: 73 18
-
Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded)
Commodity code: 73 18 15
- Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) Commodity code: 73 18 15 88
- Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) Commodity code: 73 18 15 95
- Washers of iron or steel (excl. spring washers and other lock washers) Commodity code: 73 18 22
- Non-threaded articles, of iron or steel Commodity code: 73 18 29
-
Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded)
Commodity code: 73 18 15
-
Table, kitchen or other household articles, and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel (excl. cans, boxes and similar containers of heading 7310; waste b
Commodity code: 73 23
-
Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the
Commodity code: 73 23 99
- Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the nature of a work implement; cutlery, spoons, ladles etc. of heading 8211 to 8215; ornamental articles; sanitary ware) Commodity code: 73 23 99 00
-
Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the
Commodity code: 73 23 99
-
Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406
Commodity code: 73 06
-
Miscellaneous articles of base metal
Commodity code: 83
- Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with moun Commodity code: 83 02
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
- Machine tools, incl. way-type unit head machines, for drilling, boring, milling, threading or tapping (excl. lathes and turning centres of heading 8458, gear cutting machines of heading 8461 and hand-operated machines) Commodity code: 84 59
- Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty Commodity code: 84 66
- Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles Commodity code: 85