ABRAM PULMAN AND SONS LTD

Business address

WALTON STREET SOWERBY BRIDGE WEST YORKSHIRE HX6 1AN

Commodities traded

Download trade history for ABRAM PULMAN AND SONS LTD (CSV)

Imported commodities

• Iron and steel 72
  • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated 7211
    • Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly k 721113
      • Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 72111300
  • Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) 7214
    • Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling 721491
      • Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) 72149110
    • Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling 721499
      • Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 72149939
      • Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, o 72149950
  • Angles, shapes and sections of iron or non-alloy steel, n.e.s. 7216
    • U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 721610
      • U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 72161000
    • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 721621
      • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 72162100
    • T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 721622
      • T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 72162200
    • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm 721640
      • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of >= 80 mm 72164010
  • Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel 7228
    • Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i 722830
      • Bars and rods of alloy steel other than stainless steel, of rectangular "other than square" cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72283070
      • Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods 72283089
    • Angles, shapes and sections of alloy steel other than stainless, n.e.s. 722870
      • Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded 72287010
• Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles 85
  • Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. 8538
    • Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excl. boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus) 853890
      • Electronic assemblies for electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits of heading 8535 or 8536 and for control desks, cabinets and similar combinations of apparatus of heading 8537 (excl. for wafer probers of subheading 8536.90.20) 85389091

Exported commodities

• Iron and steel 72
  • Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) 7214
    • Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling 721491
      • Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) 72149110
  • Angles, shapes and sections of iron or non-alloy steel, n.e.s. 7216
    • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 721621
      • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 72162100
• Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 84
  • Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal, sintered metal carbides or cermets, n.e.s. 8461
    • Sawing or cutting-off machines, for working metals, metal carbides or cermets (excl. machines for working in the hand) 846150
      • Sawing machines for working metals, metal carbides or cermets (excl. machines for working in the hand and circular saws) 84615019