CQFD (UK) LTD

Business address

CAMBRIDGE HOUSE 32 PADWELL ROAD SOUTHAMPTON HANTS SO14 6QZ

Commodities traded

Download trade history for CQFD (UK) LTD (CSV)

Imported commodities

• Plastics and plastic products 39
  • Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked 3916
    • Monofilament with any cross-sectional dimension of > 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of polymers of vinyl chloride 391620
      • Monofilament with any cross-sectional dimension of > 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of polymers of vinyl chloride 39162000
  • Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls (excl. floor, wall and ceiling coverings of heading 3918) 3919
    • Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide 391910
      • Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber) 39191080
  • Plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-a 3920
    • Plates, sheets, film, foil and strip, of non-cellular poly"methyl methacrylate", not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectang 392051
      • Plates, sheets, film, foil and strip, of non-cellular poly"methyl methacrylate", not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918) 39205100
    • Plates, sheets, film, foil and strip, of non-cellular plastics, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl 392099
      • Plates, sheets, film, foil and strip, of non-cellular plastics, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, those of addition polymerization, condensation and rearrangement polymerization products, floor, wall and ceiling coverings 39209990
  • Builders' ware of plastics, n.e.s. 3925
    • Building elements for the manufacture of floors, walls, partition walls, ceilings, roofs, etc., of plastics; gutters and accessories of plastics; railings, fences and similar barriers, of plastics; large shelves, for assembly and permanent installati 392590
      • Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, of plastics 39259010
  • Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. 3926
    • Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s (excl. goods of 9619) 392690
      • Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. 39269097
• Iron and steel 72
  • Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 7209
    • Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm 720927
      • Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm (excl. electrical) 72092790
    • Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated 720990
      • Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforated 72099020
  • Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) 7214
    • Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 721420
      • Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 72142000
    • Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling 721499
      • Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 72149939
  • Angles, shapes and sections of iron or non-alloy steel, n.e.s. 7216
    • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 721621
      • L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm 72162100
    • Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. U, I, H, L or T sections) 721650
      • Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm (excl. U, I, H, L or T sections) 72165010
    • Angles, shapes and sections, of iron or non-alloy steel, from flat-rolled products simply cold-formed or cold-finished (excl. profiled sheet) 721661
      • c, l, u, z, omega or open-ended sections of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products 72166110
      • Angles, shapes and sections (other than c, l, u, z, omega or open-ended sections) of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products 72166190
    • Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked 721691
      • Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked (excl. profiled sheet) 72169180
    • Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked, or hot-forged, or hot-formed by other means and further worked, n.e.s. (excl. from flat-rolled products) 721699
      • Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked, or hot-forged, or hot-formed by other means and further worked, n.e.s. (excl. from flat-rolled products) 72169900
  • Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel 7228
    • Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i 722830
      • Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72283069
    • Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu 722850
      • Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72285069
    • Angles, shapes and sections of alloy steel other than stainless, n.e.s. 722870
      • Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded 72287010
• Articles of iron or steel 73
  • Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406 7306
    • Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pi 730630
      • Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 73063012
      • Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 73063018
    • Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel 730661
      • Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 73066192
    • Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diamete 730690
      • Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 73069000
  • Cloth, incl. endless bands, grill, netting and fencing, of iron or steel wire, expanded metal of iron or steel (excl. woven products of metal fibres of a kind used for cladding, lining or similar purposes) 7314
    • Expanded metal, of iron or steel 731450
      • Expanded metal, of iron or steel 73145000
  • Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) 7318
    • Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 731815
      • Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material) 73181542
    • Threaded articles, of iron or steel, n.e.s. 731819
      • Threaded articles, of iron or steel, n.e.s. 73181900
• Copper and articles thereof 74
  • Bars, rods and profiles, of copper, n.e.s. 7407
    • Bars, rods and profiles, of copper-zinc base alloys "brass", n.e.s. 740721
      • Profiles of copper-zinc base alloys "brass", n.e.s. 74072190
• Aluminium and articles thereof 76
  • Bars, rods and profiles, of aluminium, n.e.s. 7604
    • Hollow profiles of aluminium alloys, n.e.s. 760421
      • Hollow profiles of aluminium alloys, n.e.s. 76042100
    • Bars, rods and solid profiles, of aluminium alloys, n.e.s. 760429
      • Solid profiles, of aluminium alloys, n.e.s. 76042990
  • Plates, sheets and strip, of aluminium, of a thickness of > 0,2 mm (excl. expanded plates, sheets and strip) 7606
    • Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular (excl. expanded plates, sheets and strip) 760612
      • Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 76061292
  • Articles of aluminium, n.e.s. 7616
    • Cloth, grill, netting and fencing, of aluminium wire (excl. cloth of metal fibres for clothing, lining and similar uses, and cloth, grill and netting made into hand sieves or machine parts) 761691
      • Cloth, grill, netting and fencing, of aluminium wire (excl. cloth of metal fibres for clothing, lining and similar uses, and cloth, grill and netting made into hand sieves or machine parts) 76169100