BARMOND (SPECIAL STEELS) LIMITED

Business address

UNIT 14 HARWORTH ENTERPRISE BRUNEL CLOSE HARWORTH DONCASTER DN11 8SG

Commodities traded

Download trade history for BARMOND (SPECIAL STEELS) LIMITED (CSV)

Imported commodities

• Iron and steel 72
  • Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) 7206
    • Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 720690
      • Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 72069000
  • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated 7211
    • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 721123
      • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon "electrical" 72112320
    • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 721129
      • Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 72112900
  • Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 7215
    • Bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel) 721550
      • Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight < 0,25% of carbon of rectangular "other than square" cross-section (excl. those of free-cutting steel) 72155011
  • Wire of iron or non-alloy steel, in coils (excl. bars and rods) 7217
    • Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 721710
      • Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods) 72171090
  • Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" 7219
    • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 721923
      • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 72192300
    • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 721932
      • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5% nickel 72193290
    • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 721933
      • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel 72193310
    • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 721935
      • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight >= 2,5% nickel 72193510
  • Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" 7220
    • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 722011
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 72201100
    • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 722012
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 72201200
    • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 722020
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight < 2,5% nickel 72202029
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel 72202049
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight < 2,5% nickel 72202089
    • Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 722090
      • Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforated 72209080
  • Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. 7222
    • Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 722211
      • Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel 72221111
      • Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickel 72221181
    • Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 722219
      • Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight < 2,5% nickel (excl. such products of circular cross-section) 72221990
    • Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 722220
      • Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel 72222011
    • Angles, shapes and sections of stainless steel, n.e.s. 722240
      • Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 72224090
  • Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" 7225
    • Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 722540
      • Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) 72254060
    • Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 722550
      • Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 72255080
  • Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" 7226
    • Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 722691
      • Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) 72269191
    • Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 722692
      • Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 72269200
  • Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel 7228
    • Bars and rods of high-speed steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 722810
      • Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72281090
    • Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i 722830
      • Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72283020
      • Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72283069
      • Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods 72283089
    • Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu 722850
      • Bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72285020
      • Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72285069
    • Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products an 722860
      • Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72286020
• Plastics and plastic products 39
  • Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked 3916
    • Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface worked but not further worked (excl. that of polymers of ethylene and vinyl chloride) 391690
      • Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked (excl. that of addition polymerization products, condensation or rearrangement polymerization products, whether or not chemically modified) 39169090
  • Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive pr 3921
    • Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic; self-adhesive produ 392190
      • Plates, sheets, film, foil and strip, of phenolic resins, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918) 39219030
      • Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling cove 39219090
• Articles of iron or steel 73
  • Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) 7318
    • Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 731823
      • Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 73182300
    • Non-threaded articles, of iron or steel 731829
      • Non-threaded articles, of iron or steel 73182900
• Copper and articles thereof 74
  • Plates, sheets and strip, of copper, of a thickness of > 0,15 mm (excl. expanded sheet and strip copper and electrically insulated strip) 7409
    • Plates, sheets and strip, of copper-zinc base alloys "brass", of a thickness of > 0,15 mm, in coils (excl. expanded sheet and strip and electrically insulated strip) 740921
      • Plates, sheets and strip, of copper-zinc base alloys "brass", of a thickness of > 0,15 mm, in coils (excl. expanded sheet and strip and electrically insulated strip) 74092100
  • Nails, tacks, drawing pins, staples and similar articles, of copper or with shafts of iron or steel and heads of copper, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers "incl. spring washers" and similar articles, of copper (e 7415
    • Rivets, cotters, cotter pins and the like, not threaded, of copper (excl. spring washers and spring lock washers) 741529
      • Rivets, cotters, cotter pins and the like, not threaded, of copper (excl. spring washers and spring lock washers) 74152900
• Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 82
  • Knives and cutting blades, of base metal, for machines or for mechanical appliances 8208
    • Knives and cutting blades, of base metal, for machines or for mechanical appliances, for metalworking 820810
      • Knives and cutting blades, of base metal, for machines or for mechanical appliances, for metalworking 82081000
• Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 84
  • Machine tools, incl. way-type unit head machines, for drilling, boring, milling, threading or tapping (excl. lathes and turning centres of heading 8458, gear cutting machines of heading 8461 and hand-operated machines) 8459
    • Boring-milling machines for metals, numerically controlled (excl. way-type unit head machines) 845931
      • Boring-milling machines for metals, numerically controlled (excl. way-type unit head machines) 84593100
  • Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty 8466
    • Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s. 846693
      • Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s. 84669360
    • Parts and accessories for machine tools for working metal without removing material, n.e.s. 846694
      • Parts and accessories for machine tools for working metal without removing material, n.e.s. 84669400

Exported commodities

• Iron and steel 72
  • Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel 7218
    • Semi-finished products of stainless steel (excl. of rectangular [other than square] cross-section) 721899
      • Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 72189911
  • Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" 7219
    • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 721935
      • Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight >= 2,5% nickel 72193510
  • Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" 7220
    • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 722020
      • Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel 72202041
  • Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. 7222
    • Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 722211
      • Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickel 72221181
    • Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 722219
      • Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section) 72221910
    • Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 722220
      • Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickel 72222021
      • Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel 72222031
  • Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel 7228
    • Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in i 722830
      • Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72283061
    • Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregu 722850
      • Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 72285069