ARCELORMITTAL KENT WIRE LIMITED
Business address
CHATHAM DOCKS CHATHAM KENT ME4 4SWCommodities traded
Download trade history for ARCELORMITTAL KENT WIRE LIMITED (CSV)
Imported commodities
-
Iron and steel
Commodity code: 72
-
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated
Commodity code: 72 12
-
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plastics
Commodity code: 72 12 40
- Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or plastic coated (excl. tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) Commodity code: 72 12 40 80
-
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plastics
Commodity code: 72 12 40
-
Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils
Commodity code: 72 13
- Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process Commodity code: 72 13 10
-
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring < 14 mm in diameter (excl. bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deforma
Commodity code: 72 13 91
- Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight <= 0,06% of carbon, of circular cross-section measuring < 14 mm in diameter (excl. free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord, and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during the rolling proc Commodity code: 72 13 91 41
- Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight > 0,06% and < 0,25% of carbon, of circular cross-section, measuring < 14 mm in diameter (excl. of free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during th Commodity code: 72 13 91 49
- Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) Commodity code: 72 14
-
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated
Commodity code: 72 12
-
Articles of iron or steel
Commodity code: 73
- Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel Commodity code: 73 07
- Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or Commodity code: 73 08
- Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) Commodity code: 73 18
- Springs and leaves for springs, of iron or steel (excl. clock and watch springs, springs for sticks and handles of umbrellas or parasols, shock absorbers and torque rod or torsion bar springs of Section 17) Commodity code: 73 20
- Articles of iron or steel, n.e.s. (excl. cast articles) Commodity code: 73 26
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
- Engines and motors (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines and electric motors); parts thereof Commodity code: 84 12
- Calendering or other rolling machines (other than for metals or glass) and cylinders therefor; parts thereof Commodity code: 84 20
-
Machine tools, incl. presses, for working metal by forging, hammering or die forging (excl. rolling mills); machine tools, incl. presses, slitting lines and cut-to-length lines, for working metal by bending, folding, straightening, flattening, sheari
Commodity code: 84 62
- Numerically controlled bending, folding, straightening or flattening machines for flat products (excl. profile forming machines, press brakes, panel benders and roll forming machines) Commodity code: 84 62 26
- Shearing machines, incl. presses, numerically controlled, for working metal (other than combined punching and shearing machines) Commodity code: 84 62 31
- Machine tools for working metal, sintered metal carbides or cermets, without removing material (excl. forging, bending, folding, straightening and flattening presses, shearing machines, punching or notching machines, presses and machines for working Commodity code: 84 63
- Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty Commodity code: 84 66
- Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting (other than those of heading 8515); gas-operated surface tempering machines and appliances; parts thereof Commodity code: 84 68
-
Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s.
Commodity code: 84 71
- Data-processing machines, automatic, portable, weighing <= 10 kg, consisting of at least a central processing unit, a keyboard and a display (excl. peripheral units) Commodity code: 84 71 30
- Data-processing machines, automatic, presented in the form of systems "comprising at least a central processing unit, one input unit and one output unit" (excl. portable weighing <= 10 kg and excl. peripheral units) Commodity code: 84 71 49
- Magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s. Commodity code: 84 71 90
- Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of heading 8469 to 8472, n.e.s. Commodity code: 84 73
- Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, incl. pressure-reducing valves and thermostatically controlled valves; parts thereof Commodity code: 84 81
- Transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, i Commodity code: 84 83
- Machinery parts, n.e.s. in chapter 84 (excl. parts containing electrical connectors, insulators, coils, contacts or other electrical features) Commodity code: 84 87
-
Plastics and plastic products
Commodity code: 39
- Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked Commodity code: 39 16
-
Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive pr
Commodity code: 39 21
-
Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic; self-adhesive produ
Commodity code: 39 21 90
- Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling cove Commodity code: 39 21 90 90
-
Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic; self-adhesive produ
Commodity code: 39 21 90
- Rubber and articles thereof Commodity code: 40
- Copper and articles thereof Commodity code: 74
-
Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
Commodity code: 82
-
Tools, interchangeable, for hand tools, whether or not power-operated, or for machine tools "e.g. for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving", incl. dies for drawing or extrudi
Commodity code: 82 07
-
Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, n.e.s.
Commodity code: 82 07 90
- Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, for working metal, with working parts of sintered metal carbide or cermets, n.e.s. Commodity code: 82 07 90 71
- Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s. Commodity code: 82 07 90 91
-
Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, n.e.s.
Commodity code: 82 07 90
- Knives and cutting blades, of base metal, for machines or for mechanical appliances Commodity code: 82 08
-
Tools, interchangeable, for hand tools, whether or not power-operated, or for machine tools "e.g. for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving", incl. dies for drawing or extrudi
Commodity code: 82 07
-
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
Commodity code: 85
- Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. Commodity code: 85 03
- Electrical transformers, static converters, e.g. rectifiers, and inductors; parts thereof Commodity code: 85 04
-
Electric, incl. electrically heated gas, laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and appar
Commodity code: 85 15
- Fully or partly automatic machines for resistance welding of metals Commodity code: 85 15 21
- Machines for resistance welding of metals, neither fully nor partly automatic Commodity code: 85 15 29
- Parts of machines and apparatus for soldering or welding or for hot spraying of metals, metal carbides or cermets, n.e.s. (excl. wire bonders of a kind used for the manufacture of semiconductor devices) Commodity code: 85 15 90
- Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electro-thermic hairdressing apparatus, e.g. hairdryers, hair curlers and curling tong heaters, and hand dryers; elect Commodity code: 85 16
- Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and junction boxes, for a voltage <= 1.000 V Commodity code: 85 36
- Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. Commodity code: 85 38
- Electronic integrated circuits; parts thereof Commodity code: 85 42
- Electrical parts of machinery or apparatus, n.e.s. in chapter 85 Commodity code: 85 48
- Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical, including electro-mechanical, traffic signalling equipment of all kinds Commodity code: 86
Exported commodities
- Photographic or cinematographic products Commodity code: 37
-
Iron and steel
Commodity code: 72
-
Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils
Commodity code: 72 13
-
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring < 14 mm in diameter (excl. bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deforma
Commodity code: 72 13 91
- Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight > 0,06% and < 0,25% of carbon, of circular cross-section, measuring < 14 mm in diameter (excl. of free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during th Commodity code: 72 13 91 49
-
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring < 14 mm in diameter (excl. bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deforma
Commodity code: 72 13 91
- Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) Commodity code: 72 14
-
Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils
Commodity code: 72 13
- Articles of iron or steel Commodity code: 73
-
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Commodity code: 84
- Machine tools, incl. way-type unit head machines, for drilling, boring, milling, threading or tapping (excl. lathes and turning centres of heading 8458, gear cutting machines of heading 8461 and hand-operated machines) Commodity code: 84 59
- Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any ty Commodity code: 84 66
- Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting (other than those of heading 8515); gas-operated surface tempering machines and appliances; parts thereof Commodity code: 84 68
- Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s. Commodity code: 84 71